psi a kPa
This is a straight unit conversion between psi, kPa and bar. It does not know whether your reading is gauge or absolute — keep every pressure you are comparing on the same reference, and trust the equipment plate for the rated figure.
Type a pressure into any of the three boxes and the other two update as you type. The big readout mirrors the kilopascal figure, the unit most spec sheets and torque tables over here quote for fluid and air pressure. Set the site to metric and the big readout turns round to psi — for a metric spec going onto an imperial gauge.
Ejemplo resuelto
A tyre placard says 32 psi. Multiply by 6.894757: 32 × 6.894757 ≈ 221 kPa, or about 2.21 bar. A hydraulic ram rated 3000 psi is 3000 × 6.894757 ≈ 20 684 kPa — roughly 207 bar. Going the other way, a 250 kPa placard is 250 ÷ 6.894757 ≈ 36.3 psi, and a 10 bar compressor is 1,000 kPa ≈ 145 psi.
Pruebe un ejercicio
Quick referencefor pressure
- 1 psi
- 6.895 kPa · 0.0689 bar
- 1 bar
- 14.5 psi · 100 kPa
- 1 MPa
- 145 psi · 10 bar
- Atmosphere
- 14.7 psi · 101.3 kPa · 1.013 bar
- Water head
- 1 psi = 2.31 ft of water · 1 ft of water = 0.433 psi · 1 m of water = 9.8 kPa
- Common
- 30 psi ≈ 207 kPa · 100 psi ≈ 690 kPa · 3,000 psi ≈ 207 bar
- Metric to psi
- 200 kPa ≈ 29 psi · 700 kPa ≈ 101.5 psi · 10 bar ≈ 145 psi · 200 bar ≈ 2,900 psi
Mistakes to catchbefore you trust the number
- Reading a gauge in bar as psi — a bar is about 14.5 psi, and an 8 bar tool on a 150 psi compressor is over its rating.
- Confusing gauge pressure with absolute; a tyre gauge reads above atmospheric, and the tool converts whatever number you type without adding the 14.7.
- Rounding 1 psi to 7 kPa on a long chain of conversions; it is 6.895, and the difference is 1.5%.
La fórmula
kPa = psi × 6.894757 · bar = kPa ÷ 100
A pascal is one newton per square metre; a psi is one pound-force per square inch. The 6.894757 factor is just those two force-and-area definitions reconciled. Bar is defined as exactly 100 kPa, which is why moving between kPa and bar is only a decimal shift.
Preguntas
- How do I convert psi to kPa?
- Multiply the psi figure by 6.894757. So 100 psi is about 689 kPa, and 30 psi in a tyre is roughly 207 kPa. This tool carries the full factor and shows bar as well, since gauges on this side of the shop are marked in all three.
- What is 1 bar in psi?
- One bar is 100 kPa, which works out to about 14.5 psi. Bar is handy because it sits within a rounding error of one atmosphere, so a tyre at 2 bar is close to 29 psi. Type any of the three boxes here and the other two follow.
- Is kPa the same as kg/cm²?
- No, though old gauges sometimes mix them. One kg/cm² is about 98.07 kPa, so it is close to a bar but not identical. This tool works in psi, kPa and bar; if your gauge reads kg/cm², treat it as roughly bar and confirm against the equipment plate.
- Does this handle vacuum or negative pressure?
- The arithmetic works on any number you type, including negatives, but gauge and absolute pressure are different reference points. If you are working in vacuum or absolute terms, make sure every figure you compare uses the same reference before you convert.
Herramientas relacionadas
¿Ve algo incorrecto en esta página? Repórtelo
Gracias — su reporte fue enviado.
No se pudo enviar. Vuelva a intentarlo más tarde.
Calculadoras que encajan con su trabajo — por correo, opcional
Deje su correo y marque la casilla: como máximo una nota breve cada dos semanas con calculadoras relacionadas con las que usted usa — aquí y en bentright.com y sparkytools.net. Una lista común a los tres, baja con un clic, y no enviamos nada hasta que confirme desde su bandeja de entrada.