Grados a porcentaje de pendiente
This converts between an angle, a grade percentage and a rise-per-12 pitch. It describes steepness only — it does not set a drainage fall, a ramp limit or an accessible gradient, all of which are governed by codes you should check for the job.
Type an angle in degrees and read the grade percentage, or type a grade and read the angle — both update as you go. The pitch line reports the same slope as rise-per-12, the framing-square language — or, with the site set to metric, as millimetres of rise per metre of run — and the ratio line gives it as rise:run.
Ejemplo resuelto
A survey shows a 10° bank. tan(10°) ≈ 0.176, so that is a 17.6% grade, which is about a 2.1/12 pitch — or 176 mm of rise per metre of run. Working the other way, a road sign warning of a 6% grade is arctan(0.06) ≈ 3.4° — gentle to the eye but real on a loaded truck.
Pruebe un ejercicio
Quick referencefor slope
- Percent
- tan(angle) × 100 · angle = arctan(percent ÷ 100)
- Degrees → percent
- 1° 1.7% · 2° 3.5% · 5° 8.7% · 10° 17.6% · 15° 26.8% · 20° 36.4% · 30° 57.7% · 45° 100%
- Percent → degrees
- 1% 0.57° · 2% 1.15° · 5% 2.9° · 8% 4.6° · 10% 5.7° · 25% 14° · 50% 26.6°
- Pendiente de techo
- x/12 = percent × 0.12 · 6/12 = 50% = 26.6°
- Per metre
- mm per m = percent × 10 · 2% = 20 mm/m · 1:50 = 2% · 1:12 = 83 mm/m
- Relación
- 1:N = 100 ÷ N % · 1:12 = 8.3% = 4.8° · 1:20 = 5% = 2.9°
Mistakes to catchbefore you trust the number
- Reading a percent grade as degrees: 100% is 45°, and a 10% drive is only 5.7°.
- Measuring the angle with a phone on a rough surface — an app reads the phone, not the average grade; take rise over a long run with a level and string instead.
- Confusing a 1:12 ratio with 12% — 1:12 is 8.3%. The tool shows both so you can hand over the one the next trade uses.
La fórmula
percent = tan(angle) × 100 · angle = arctan(percent ÷ 100)
Grade is the rise divided by the run, and the tangent of an angle is exactly that ratio, so the two are the same quantity in different clothes. Multiply the ratio by 12 for the roofing pitch. The scales diverge because degrees run to 90 while grade has no ceiling — a vertical face is 90° but an infinite percent.
Preguntas
- How do I convert degrees to percent slope?
- Take the tangent of the angle and multiply by 100. A 10° slope is tan(10°) × 100 ≈ 17.6%. The two are not the same scale: a 45° slope is 100%, not 50%, because percent is rise over run rather than a share of a right angle.
- How do I convert percent grade back to degrees?
- Take the arctangent of the grade written as a decimal. A 25% grade is arctan(0.25) ≈ 14.0°. This tool does it live in both directions and also shows the figure as rise-per-12, the way a roofer reads pitch.
- Why is a 45° slope 100% and not 50%?
- Because percent grade compares vertical rise to horizontal run, and at 45° the rise equals the run — one unit up for one unit across, which is 100%. Degrees measure the angle out of 90, so the two only line up loosely at the shallow end.
- What is rise-per-12 and where is it used?
- It is the same slope written as inches of rise for every 12 inches of run, which is how roof pitch is called out. A 4/12 roof rises 4 in per foot, works out to about 18.4°, and a 33% grade. The tool shows all three so you can talk to whichever trade is asking.
Herramientas relacionadas
¿Ve algo incorrecto en esta página? Repórtelo
Gracias — su reporte fue enviado.
No se pudo enviar. Vuelva a intentarlo más tarde.
Calculadoras que encajan con su trabajo — por correo, opcional
Deje su correo y marque la casilla: como máximo una nota breve cada dos semanas con calculadoras relacionadas con las que usted usa — aquí y en bentright.com y sparkytools.net. Una lista común a los tres, baja con un clic, y no enviamos nada hasta que confirme desde su bandeja de entrada.