mm a pulgadas
This is the exact 25.4 mm-per-inch definition worked both ways. The tape fraction is rounded to the nearest mark, so trust the decimal when a job is fussy about the last few thousandths.
Type a figure in either box and the other updates as you go. The big readout is the inch value snapped to the nearest sixteenth — the mark you actually cut to — with the exact decimal underneath for when a sixteenth is not close enough. With the site set to metric the big readout is the millimetres instead, and the tape mark sits under it.
Ejemplo resuelto
A drawing calls out 100 mm. Divide by 25.4: 100 ÷ 25.4 ≈ 3.937 in. On the tape that rounds to 3 15/16″ — a thirty-second under 4 inches. Going the other way, 3/4″ is 0.75 × 25.4 = 19.05 mm.
Pruebe un ejercicio
Quick referencefor mm and inches
- The definition
- 1 in = 25.4 mm exactly · 1 mm = 0.03937 in
- Fractions in mm
- 1/16 = 1.6 · ⅛ = 3.2 · ¼ = 6.35 · ⅜ = 9.5 · ½ = 12.7 · ⅝ = 15.9 · ¾ = 19.05 · 1 in = 25.4
- Round numbers
- 10 mm ≈ 25/64 · 20 mm ≈ 25/32 · 50 mm ≈ 1 31/32 · 100 mm = 3 15/16 · 300 mm ≈ 11 13/16
- Pies
- 1 ft = 304.8 mm · 1 m = 39.37 in = 3′ 3⅜″
- Quick check
- mm ÷ 25 is close enough to spot a wrong answer; ÷ 25.4 to cut
Mistakes to catchbefore you trust the number
- Dividing by 25 instead of 25.4 in your head — over a metre that is a 16 mm slip, which is more than half an inch.
- Reading the tool's tape fraction as exact: it is the nearest sixteenth, and the decimal beside it is the true figure.
- Confusing centimetres with millimetres on a plan; a dimension with no units and a decimal point is usually metres, not mm.
La fórmula
inches = mm ÷ 25.4 · mm = inches × 25.4
The inch was fixed at exactly 25.4 millimetres by international agreement in 1959, so this is a definition rather than a measurement — the conversion never drifts and needs no rounding until you snap it to a tape mark.
Preguntas
- How do I convert mm to inches?
- Divide the millimetres by 25.4. An inch is defined as exactly 25.4 mm, so 100 mm ÷ 25.4 ≈ 3.937 inches. This tool does the division live, and it also reads the answer back as a tape fraction so you are not squinting at a decimal on the saw.
- What is 1 inch in millimetres?
- Exactly 25.4 mm — that is the definition of the inch, not a rounded figure. So 2 inches is 50.8 mm, half an inch is 12.7 mm, and a sixteenth is 1.5875 mm. Type either box and the other follows instantly.
- Why does the fraction not match the decimal exactly?
- A tape is only marked in sixteenths (or thirty-seconds), so the fraction here is the nearest mark, not the exact number. The exact decimal is shown beside it. On a rip you usually want the mark; on a layout you may want the decimal.
- Is this the same as converting cm to inches?
- Same idea, one decimal place over — a centimetre is 10 mm, so multiply your cm figure by 10 and drop it in the mm box. For metres, multiply by 1000. The inch definition does the rest.
Herramientas relacionadas
¿Ve algo incorrecto en esta página? Repórtelo
Gracias — su reporte fue enviado.
No se pudo enviar. Vuelva a intentarlo más tarde.
Calculadoras que encajan con su trabajo — por correo, opcional
Deje su correo y marque la casilla: como máximo una nota breve cada dos semanas con calculadoras relacionadas con las que usted usa — aquí y en bentright.com y sparkytools.net. Una lista común a los tres, baja con un clic, y no enviamos nada hasta que confirme desde su bandeja de entrada.